TOOL / 01

Find a dryer that fits.

Start with a named material profile or your own datasheet. Add the spools you use. See why each model makes—or misses—the shortlist.

Your setup

Manufacturer drying profile

This profile calls for 55°C. Read the source ↗

Spools to dry at once

Reel diameter (mm, optional)Reel width (mm, optional)

A material profile is not permission to heat any reel to that temperature. Confirm spool limits and follow the equipment manual.

12 documented matches

55°C · 1 spool

Matches meet the documented requirements you entered. Physical reel fit remains unchecked where you left a dimension blank. They are not performance test results.

As an Amazon Associate, we earn from qualifying purchases. Buying through our links may earn us a commission.

SUNLU / DRYING

SUNLU S4

A four-spool station with one shared temperature setting, circulation fans, and humidity-controlled operation.

4 spoolsUp to 70°C

Check on Amazon Details & tradeoffs

SUNLU / DRYING

SUNLU S2

A single-spool dryer with a 70°C ceiling and a documented 210 ×85mm reel envelope. Check the fan-equipped revision.

1 spoolUp to 70°C

Check on Amazon Details & tradeoffs

Creality / DRYING

Creality Space Pi Plus

A two-spool hot-air dryer for keeping two rolls ready at one shared temperature.

2 spoolsUp to 70°C

Check on Amazon Details & tradeoffs

SUNLU / DRYING

SUNLU S4 Pro

Two independently controlled chambers let four spools share a station while using different drying settings.

4 spoolsUp to 85°C

Check on Amazon Details & tradeoffs

SUNLU / DRYING

SUNLU E2

A higher-temperature dryer reaching 110°C for named engineering grades whose datasheets call for more heat.

2 spoolsUp to 110°C

Check on Amazon Details & tradeoffs

SUNLU / DRYING

SUNLU S1 Plus

A compact single-spool starting point with a 55°C ceiling. Match that limit to your exact filament.

1 spoolUp to 55°C

Check on Amazon Details & tradeoffs

Creality / DRYING

Creality Space Pi

A single-spool PTC hot-air dryer with an adjustable 45–70°C range.

1 spoolUp to 70°C

Check on Amazon Details & tradeoffs

Creality / DRYING

Creality SpacePi SE

A smaller single-spool dryer with a 65°C ceiling and a relatively tight 190 ×68mm reel envelope.

1 spoolUp to 65°C

Check on Amazon Details & tradeoffs

Creality / DRYING

Creality SpacePi X4

A four-spool station with two independent heated chambers, active exhaust, and an 85°C ceiling.

4 spoolsUp to 85°C

Check on Amazon Details & tradeoffs

Sovol / DRYING

Sovol SH02

A two-spool PTC dryer reaching 70°C, with a documented two-reel layout of 200 ×70mm per spool.

2 spoolsUp to 70°C

Check on Amazon Details & tradeoffs

EIBOS / DRYING

EIBOS Polyphemus 80°C

A two-spool rotating dryer in the verified 80°C temperature variant, with humidity control and adjustable exhaust.

2 spoolsUp to 80°C

Check on Amazon Details & tradeoffs

Comgrow / DRYING

Comgrow SH03

Four-spool capacity in two independent chambers, with a 45–85°C range and automatic vents.

4 spoolsUp to 85°C

Check on Amazon Details & tradeoffs

Needs verification: 3

One or more required specifications are unknown. These products are not confirmed matches. PolyDryer, for example, uses power levels rather than a published adjustable Celsius range.